فارسی
Tabriz Petrochemical HD5218EA HDPE Datasheet
HD5218EA is high density polyethylene copolymer containing butene-1(C4) as comonomer. It is suitable for thin wall injection moulding applications. HD5218EA has the following characteristics: high warpage resistance,high flow,fast cycling injection moulding
General Properties
Grade Name
HD5218EA
Manufacturer
Tabriz Petrochemical
Datasheet
Download
Categories
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Injection Molding
Features
Fast Cycling Injection Moulding, Good Warpage Resistance, Good Flowability
Physical Properties
Value
Unit
Test Conditions
Test Method
Contamination
5
Density
0.952
g/cm³
ASTM D1505
MFI
18
g/10min
At 2.16Kg Load
ASTM D1238
Mechanical Properties
Value
Unit
Test Conditions
Test Method
Charpy Impact Notched
3
kJ/m²
ASTM D6110
Tensile Elongation at Break
900
%
ASTM D638
Tensile Strength at Yield
20
MPa
ASTM D638
Thermal Properties
Value
Unit
Test Conditions
Test Method
Vicat Softening Point
115
C°
ASTM D1525
Optical Properties
Value
Unit
Test Conditions
Test Method
Whiteness Index
60
ASTM E-313
Yellow Index
-1
ASTM E-313
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.