Tabriz Petrochemical HD5218UA HDPE Datasheet

HD5218UA is high density polyethylene copolymer containing butene-1(C4) as comonomer. It is suitable for thin wall injection moulding applications. HD5218UA has the following characteristics: high warpage resistance,high flow,fast cycling injection moulding,uv stabilised. Applications: general purpose injection moulding with outdoor&indoor applications.

General Properties

Grade Name
HD5218UA
Manufacturer
Tabriz Petrochemical
Datasheet
Categories
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Injection Molding
Applications
Outdoor Applications, Thin-Wall Products
Features
Good Flowability, Fast Cycling Injection Moulding, Good Warpage Resistance, Good UV Resistrance

Physical Properties

Value Unit Test Conditions Test Method
Contamination 5
Density 0.952 g/cm³ ASTM D1505
MFI 18 g/10min At 2.16Kg Load ASTM D1238

Mechanical Properties

Value Unit Test Conditions Test Method
Charpy Impact Unnotched 3 kJ/m² ASTM D6110
Tensile Elongation at Break 900 % ASTM D638
Tensile Strength at Yield 20 MPa ASTM D638

Thermal Properties

Value Unit Test Conditions Test Method
Vicat Softening Point 115 ASTM D1525

Optical Properties

Value Unit Test Conditions Test Method
Whiteness Index 60 ASTM E-313
Yellow Index -1 ASTM E-313

Disclaimer

The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

Share

Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.