Amir Kabir Petrochemical Lupolen 2420D LDPE Datasheet

Lupolen 2420 D is a non -additivated,low density Polyethylene.It is delivered in pellet form.

General Properties

Grade Name
Lupolen 2420D
Manufacturer
Amir Kabir Petrochemical
Datasheet
Categories
Polymer, Thermoplastic, Polyethylene, Low Density Polyethylene
Processing Methods
Injection Molding, Blow Molding, Blown Film
Applications
Bottle, Film, Pouches, Shrink Films, Light-Duty Films
Features
Good Tear Strength, Good Toughness, Good Processability

Physical Properties

Value Unit Test Conditions Test Method
Density 0.923 g/cm³ ISO 1183
MFI 0.25 g/10min At 2.16Kg Load, 190°C ISO 1133

Mechanical Properties

Value Unit Test Conditions Test Method
Film Elongation at Break, MD 200 % ISO 527
Film Elongation at Break, TD 500 % ISO 527
Film Tensile Strength at Break, MD 27 MPa ISO 527
Film Tensile Strength at Break, TD 20 MPa ISO 527
Impact Strength, Dart 250 gr 50 Blown film ASTM D1709
Tensile Modulus 240 MPa ISO 527
Tensile Strength at Yield 10 MPa ISO 527

Thermal Properties

Value Unit Test Conditions Test Method
Vicat Softening Point 94 50°C/h, 10N ISO 306

Optical Properties

Value Unit Test Conditions Test Method
Gloss 50 60°/50 ASTM D2457
Haze 14 % <14, 50 ASTM D1003

Disclaimer

The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

Share

Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.