فارسی
Amir Kabir Petrochemical EX5 (GM 9450 F) HDPE Datasheet
EX5 (GM 9450 F) is a high Density polyethylene with Butene-1 as comonomer. It is a high molar mass for blown Þlm with in comparison to EX4 lower stiffness and increased tenacity .The product has good toughness,low gel level and good tear strength. Stabilization: Ca-Stearate, Zn-Stearate, Irgafos168
General Properties
Grade Name
EX5 (GM 9450 F)
Manufacturer
Amir Kabir Petrochemical
Datasheet
Download
Categories
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Blown Film
Applications
Film, Light-Duty Films, Food Bag
Features
Good Tenacity, Good Tear Strength, Good Toughness, Low Gel Level, Food Contact
Physical Properties
Value
Unit
Test Conditions
Test Method
Density
0.947 - 0.951
g/cm³
ISO 1183
Flow Rate Ratio (FRR)
26 - 34
21.6kg/5kg
MFI
0.21 - 0.35
g/10min
At 5Kg Load, 190°C
ISO 1133
MFI
6 - 10
g/10min
At 21.6Kg Load, 190°C
ISO 1133
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.