Amir Kabir Petrochemical EX3 (GM 5010 T2N) HDPE Datasheet

“EX3 (GM 5010 T2N)” is a natural colored high density polyethylene with Butene-1 as comonomer. The product is classiÞed as PE100 and shows good stress crack resistance properties (ESCR) combined with good impact strength. Stabilization: Ca-Stearate, Zn-Stearate, Irganox1010, Irgafos168

General Properties

Grade Name
EX3 (GM 5010 T2N)
Amir Kabir Petrochemical
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Extrusion, Injection Molding
Pipes, Sheet, Pipe Fittings, Gas Pipes, Water Pipes, Sewer Pipes, Pressure Pipes
Good Environmental Stress Crack Resistance (ESCR), PE100, Good Impact Strength

Physical Properties

Value Unit Test Conditions Test Method
Density 0.943 - 0.947 g/cm³ ISO 1183
Flow Rate Ratio (FRR) 24 - 32 21.6kg/5kg
MFI 0.4 - 0.5 g/10min At 5Kg Load, 190°C ISO 1133
MFI 9 - 15 g/10min At 21.6Kg Load, 190°C ISO 1133

Mechanical Properties

Value Unit Test Conditions Test Method
Charpy Impact Notched 12 kJ/m² ISO 179/1eA
Pipe Hydrostatic Strength 1000 h Minimum Value, 80oc, 4N/mm2 ISO 1167


The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.


Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.