Arya Sasol Petrochemical LFI 2130 LDPE Datasheet

LFI 2130 is a grade with excellent toughness and outstanding biaxial shrink properties. The material contains only antioxidant, has very low energy consumption during processing and has excellent draw down ability

General Properties

Grade Name
LFI 2130
Manufacturer
Arya Sasol Petrochemical
Datasheet
Categories
Polymer, Thermoplastic, Polyethylene, Low Density Polyethylene
Processing Methods
Blown Film
Applications
Film, Shrink Films, Light-Duty Films, Liner Bag, Heavy-Duty Sacks
Features
Good Toughness, Food Contact, Good Drawdown Ability

Physical Properties

Value Unit Test Conditions Test Method
Density 0.921 g/cm³ ISO 1183
MFI 0.3 g/10min At 2.16Kg Load , 190°C ISO 1133

Mechanical Properties

Value Unit Test Conditions Test Method
Blocking 5 gr 5<
Coefficient of Friction 0.7 ASTM D1894
Dart Drop Impact Strength 31 KJ/m ASTM D4272
Film Elongation at Break, MD 350 % 350< ISO 527
Film Elongation at Break, TD 500 % 500< ISO 527
Film Tensile Modulus, MD 140 MPa ISO 527
Film Tensile Modulus, TD 150 MPa 150< ISO 527
Film Tensile Strength at Break, MD 22 MPa ISO 527
Film Tensile Strength at Break, TD 24 MPa ISO 527
Film Tensile Strength at Yield, MD 11 MPa ISO 527
Film Tensile Strength at Yield, TD 10 MPa ISO 527
Re-Blocking 20 gr
Tear Strength, MD 20 kN/m ISO 6383
Tear Strength, TD 45 kN/m ISO 6383

Optical Properties

Value Unit Test Conditions Test Method
Gloss 55 45° ASTM D2457
Haze 12 % ASTM D1003

Disclaimer

The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

Share

Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.