Arya Sasol Petrochemical HCH 5020 (HB5020) HDPE Datasheet

HCH 5020 is suitable for Extrusion Blow Moulding (Small blow mouldings, Engineering parts), Packaging of consumer goods, Packaging of dangerous goods, Packaging of surfactants

General Properties

Grade Name
HCH 5020 (HB5020)
Arya Sasol Petrochemical
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Blow Molding
Engineering Parts, Bottle
Pharmaceutical Grade, Food Contact

Physical Properties

Value Unit Test Conditions Test Method
Density 0.95 g/cm³ ISO 1183
Density 0.5 g/cm³ bulk , >0.5
MFI 22 g/10min At 21.6Kg Load , 190°C ISO 1133
MFI 0.3 g/10min At 2.16Kg Load , 190°C ISO 1133

Mechanical Properties

Value Unit Test Conditions Test Method
ESCR 150 h Basell, Bottle Test
Full-notch creep test (FNCT) 6 h 3.5MPa, 80°C, 2% Igepal BC/9 ISO 16770
Hardness Ball Indentation 45 MPa H 132/30 ISO 2039-1
Tensile Elongation at Yield 9 % ISO 527
Tensile Modulus 1000 MPa ISO 527
Tensile notched impact strength 110 kJ/m² at -30°C ISO 8256
Tensile Strength at Yield 25 MPa ISO 527

Thermal Properties

Value Unit Test Conditions Test Method
Heat Deflection Temperature 75 At 0.45 MPa ISO 75
Heat Deflection Temperature 43 At 1.82 MPa ISO 75
Melting Point 131 ISO 11357-1
Vicat Softening Point 78 50°C/h , 50N ISO 306


The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.


Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.