فارسی
Bandar Imam Petrochemical LH0075 LDPE Datasheet
LH0075 is a high molecular weight low density polyethylene film grade combining goodflexible extrusion behavior and superior mechanical properties. Film made from LH0075 exhibits high dart impact combined with excellent yield and tensile strength and high stiffness. It can be processed on automatic machines. It possesses good dimensional stability. LH0075 is chiefly recommended for extrusion of blown film. It is suitable for shrink film having a high resistance to hole formation and high degree of shrinkage on cooling. LH0075 contains antioxidant.
General Properties
Grade Name
LH0075
Manufacturer
Bandar Imam Petrochemical
Datasheet
Download
Categories
Polymer, Thermoplastic, Polyethylene, Low Density Polyethylene
Processing Methods
Blow Molding, Blown Film
Applications
Pharmaceutical Products Packaging, Bottle, Food Containers, Film, Container, Shrink Films, Light-Duty Films, Bag
Features
Good Tensile Strength, Good Stiffness, Good Tensile Properties, Good Dimensional Stability, Good Shrink Properties, Food Contact, High Molecular Weight, Good Impact Strength
Physical Properties
Value
Unit
Test Conditions
Test Method
Density
0.92
g/cm³
MFI
0.75
g/10min
At 2.16Kg Load , 190°C
ASTM D1238
Mechanical Properties
Value
Unit
Test Conditions
Test Method
Film Elongation at Break, MD
300
%
Minimum Value
ASTM D882
Film Elongation at Break, TD
450
%
Minimum Value
ASTM D882
Film Tensile Strength at Break, MD
16.67
MPa
Minimum Value
ASTM D882
Impact Strength, Dart
120
gr
Minimum Value
ASTM D1709
Thermal Properties
Value
Unit
Test Conditions
Test Method
Heat Deflection Temperature
33
C°
ASTM D648
Vicat Softening Point
95
C°
ASTM D1525
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.