Jam PolyPropylene Company Jampilen HP510L PP Homo Datasheet

″Jampilen HP510L″ is a polypropylene homopolymer with good flow properties and is particularly suitable for the extrusion of film yarn, monofilament, cast film and sheet. ″Jampilen HP510L″ combines outstanding processability with good mechanical properties. Film yarn made of ″Jampilen HP510L″ is used for baler twines, packaging twines and ropes. ″Jampilen HP510L″ is well suited for the production of monofilament used for instance in brush and broom filling and technical applications.

General Properties

Grade Name
Jampilen HP510L
Jam PolyPropylene Company
Polymer, Thermoplastic, Polypropylene, Polypropylene Homopolymer
Processing Methods
Extrusion, Thermoforming, Cast Film, Fiber Forming
Drinking Straw, Film, Fibers, Sheet, Light-Duty Films, Thermoforming Sheet, Film Yarn, Rope and Twine, Monofilament, Brush Fibers
Good Mechanical Properties, Good Flowability, Good Processability, Food Contact

Physical Properties

Value Unit Test Conditions Test Method
Density 0.9 g/cm³ ASTM D1505
MFI 6 g/10min At 2.16Kg Load , 230°C ASTM D1238

Mechanical Properties

Value Unit Test Conditions Test Method
Flexural Modulus 1400 MPa ASTM D790
Izod Impact Strength, Notched 40 J/m at +23°C ASTM D256
Tensile Elongation at Yield 9 % ASTM D638
Tensile Strength at Yield 32 MPa ASTM D638

Thermal Properties

Value Unit Test Conditions Test Method
Heat Deflection Temperature 84 At 0.46 MPa or 66 psi ASTM D648
Oven Aging 360 h At 150°C , Air ASTM D3012
Vicat Softening Point 152 10N ASTM D1525


The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.


Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.