Jam PolyPropylene Company Jampilen HP550J PP Homo Datasheet

″Jampilen HP550J″ is a polypropylene homopolymer particularly suitable for the extrusion of sheet for thermoforming, film yarn and monofilament. This grade combines outstanding processability with good mechanical properties. ″Jampilen HP550J″ is designed for the production of films that can be converted into stretched tapes for weaving applications. Textile film yarns with a denier count of not more than 1100 to 1200 are used for the production of carpet backings, bags, industrial fabrics, mats and artificial grass. Film yarn with a denier count ranging from 3000 to 28000 is used for baler twines, packaging twines and ropes ″Jampilen HP550J″ is suitable for food contact.

General Properties

Grade Name
Jampilen HP550J
Manufacturer
Jam PolyPropylene Company
Datasheet
Categories
Polymer, Thermoplastic, Polypropylene, Polypropylene Homopolymer
Processing Methods
Fiber Forming, Extrusion
Applications
Carpets and Rugs, Belts, Bag and Backpack , Dairy Products Containers, Sheet, Artificial Grass, Fibers, Thermoforming Sheet, Raffia, Rope and Twine, Monofilament, Brush Fibers, Tape, Film Yarn, Refrigerator Parts
Features
Good Processability, Good Mechanical Properties, Food Contact

Physical Properties

Value Unit Test Conditions Test Method
Density 0.9 g/cm³ ASTM D1505
MFI 3.2 g/10min At 2.16Kg Load, 230°C ASTM D1238

Mechanical Properties

Value Unit Test Conditions Test Method
Flexural Modulus 1400 MPa ASTM D790
Izod Impact Strength, Notched 50 J/m at +23°C ASTM D256
Tensile Elongation at Yield 9 % ASTM D638
Tensile Strength at Yield 32 MPa ASTM D638

Thermal Properties

Value Unit Test Conditions Test Method
Heat Deflection Temperature 84 At 0.46 MPa or 66 psi ASTM D648
Oven Aging 360 h At 150°C , Air ASTM D3012
Vicat Softening Point 152 10N ASTM D1525

Disclaimer

The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

Share

Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.