فارسی
Jam PolyPropylene Company Jampilen EP440L PP Co Datasheet
″Jampilen EP440L″ is a medium flow heterophasic polypropylene copolymer with improved mechanical properties balance. The product features high stiffness and outstanding impact strength at low temperatures and is specifically designed for injection molding applications. In comparison with conventional copolymers with the same MFR and same rigidity, ″Jampilen EP440L″, exhibits 35 % higher toughness. ″Jampilen EP440L″ is suitable for a wide range of applications in the packaging, automotive and consumer goods industries. Typical applications include luggage, paint pails, buckets, containers, crates, batteries and large toys.
General Properties
Grade Name
Jampilen EP440L
Manufacturer
Jam PolyPropylene Company
Datasheet
Download
Categories
Polymer, Thermoplastic, Polypropylene, Polypropylene Copolymer
Processing Methods
Injection Molding
Applications
Toys, Automotive Parts, Pails, Container, Crates, Battery Cases
Features
High Impact Strength, Good Stiffness, Heterophasic Copolymer
Physical Properties
Value
Unit
Test Conditions
Test Method
Density
0.9
g/cm³
ASTM D1505
MFI
6
g/10min
At 2.16Kg Load, 230°C
ASTM D1238
Mechanical Properties
Value
Unit
Test Conditions
Test Method
Flexural Modulus
1400
MPa
ASTM D790
Hardness Shore D
68
ISO 868
Izod Impact Strength, Notched
170
J/m
at +23°C
ASTM D256
Izod Impact Strength, Notched
70
J/m
at -20°C
ASTM D256
Tensile Elongation at Yield
9
%
ASTM D638
Tensile Strength at Yield
26
MPa
ASTM D638
Thermal Properties
Value
Unit
Test Conditions
Test Method
Heat Deflection Temperature
95
C°
At 0.46 MPa
ASTM D648
Oven Aging
360
h
At 150°C , Air
ASTM D3012
Vicat Softening Point
152
C°
10N
ASTM D1525
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.