فارسی
Jam PolyPropylene Company Jampilen EP440G PP Co Datasheet
″Jampilen EP440G″ is a nucleated heterophasic copolymer especially developed for extrusion applications. ″Jampilen EP440G″ exhibits high stiffness, very high impact properties at room and sub-zero temperatures, good dimensional stability and excellent creep and deforming resistance. The main applications of ″Jampilen EP440G″ are thermoforming, corrugated board and extrusion blow molding.
General Properties
Grade Name
Jampilen EP440G
Manufacturer
Jam PolyPropylene Company
Datasheet
Download
Categories
Polymer, Thermoplastic, Polypropylene, Polypropylene Copolymer
Processing Methods
Extrusion, Blow Molding, Thermoforming
Applications
Profile, Pipes, Container, Bottle, Crates, Sheet, Pipe Fittings
Features
Good Dimensional Stability, Heterophasic Copolymer, Good Stiffness, High Impact Strength, Good Creep Resistance
Physical Properties
Value
Unit
Test Conditions
Test Method
Density
0.9
g/cm³
ASTM D1505
MFI
1.3
g/10min
230°C/2.16Kg
ASTM D1238
Mechanical Properties
Value
Unit
Test Conditions
Test Method
Flexural Modulus
1300
MPa
ASTM D790
Izod Impact Strength, Notched
500
J/m
at +23°C
ASTM D256
Izod Impact Strength, Notched
70
J/m
at -20°C
ASTM D256
Tensile Elongation at Break
50
%
>50
ASTM D638
Tensile Elongation at Yield
6
%
ASTM D638
Tensile Strength at Yield
25
MPa
ASTM D638
Thermal Properties
Value
Unit
Test Conditions
Test Method
Heat Deflection Temperature
92
C°
At 0.46MPa
ASTM D648
Oven Aging
360
h
at 150°C
ASTM D3012
Vicat Softening Point
150
C°
10N
ASTM D1525
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.