فارسی
Ilam Petrochemical 2200J HDPE Datasheet
2200J is an injection grade manufactured by the suspension polymerization of ethylene monomer.
General Properties
Grade Name
2200J
Manufacturer
Ilam Petrochemical
Datasheet
Download
Categories
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Injection Molding
Applications
Crates, Tray, Container, Tool Boxes
Features
Good Rigidity, Good Impact Strength
Physical Properties
Value
Unit
Test Conditions
Test Method
Density
0.964
g/cm³
ISO 1183
MFI
5.2
g/10min
At 2.16Kg Load , 190°C
ISO 1133
Mechanical Properties
Value
Unit
Test Conditions
Test Method
ESCR
4
h
ASTM D1693
Izod Impact Strength, Notched
5
J/m
23°C
ASTM D256
Tensile Elongation at Break
300
%
>300
ASTM D638
Tensile Strength at Break
17
MPa
ASTM D638
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.