فارسی
Arvand Petrochemical S7042 PVC Homo Datasheet
General Properties
Grade Name
S7042
Manufacturer
Arvand Petrochemical
Datasheet
Download
Categories
Polymer, Thermoplastic, Polyvinyl Chloride, Polyvinyl Chloride Homopolymer
Processing Methods
Dip Coating, Injection Molding, Extrusion
Applications
Profile, Film, Shoe and Footwear, Wire and Cable Jacket, Medical Gloves, Medical Tubes
Features
Suspension PVC
Physical Properties
Value
Unit
Test Conditions
Test Method
Ash Content
0.1
WT.%
Sulfate ash, < 0.1
ISO 3451-1
Dark Resin Particles
20
Count
≤ 20
Density
0.45 - 0.51
g/cm³
Bulk density
ISO 60
Fish Eye
2
Count
≤ 2
Flowability
35
S/150g
10mm nozzle, ≤ 35
ISO 6186
K-Value
69 - 71
ISO 1628
Particle size distribution
95 - 100
%
63μm<
ISO 4610
Particle size distribution
0 - 1
%
250μm<
ISO 4610
Particle size distribution
1
%
Retained on 0.4 mm sieve, < 1
ISO 4610
Porosity
29 - 35
%
plasticiser absorption
ISO 4608
VCM Residual Monomer
1
ppm
≤ 1
ISO 6401
Viscosity Number
120 - 129
cm³/g
ISO 1628
Volatiles
0.3
%
< 0.3
ISO 1269
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.