Bandar Imam Petrochemical SBR-1502 SBR Datasheet

General Properties

Grade Name
Bandar Imam Petrochemical
Polymer, Elastomer, Styrene Butadiene Rubber
Floor Coverings, Toys, Rubber Goods, Shoe and Footwear, Wire and Cable Jacket, Automotive Tires, Bicycle Tires
Good Heat Resistance, Good Abrasion Resistance, Good Electrical Resistance, Cold Emulsion

Physical Properties

Value Unit Test Conditions Test Method
Ash Content 1.5 WT.% Maximum Value ASTM D1416
Mooney Viscosity 46 - 58 MU ML1+4 at 100°C ASTM D1646
Mooney Viscosity 84 MU Maximum Value, ML1+4 at 100°C-Compounded ASTM D1646
Organic Acids 4.75 - 7 % ASTM D1416
Soaps 0.5 % Maximum Value ASTM D1416
Styrene Content 22.5 - 24.5 % ASTM D1416
Volatiles 0.75 % Maximum Value ASTM D1416

Mechanical Properties

Value Unit Test Conditions Test Method
Tensile Elongation at Break 350 % Minimum Value, 35min cured ASTM D412
Tensile Modulus 16.34 - 20.26 MPa 300% Modulus ,35min cured ASTM D412
Tensile Strength at Break 24.5 MPa Minimum Value, 35min cured ASTM D412


The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.


Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.