Shazand (Arak) Petrochemical Monoethylene glycol (MEG) MEG Datasheet

MONOETHYLENEGLYCOL obtained from the reaction of ethylene oxide and water. It is a clear, transparent and odorless liquid that can be mixed with water in any proportion.

General Properties

Grade Name
Monoethylene glycol (MEG)
Manufacturer
Shazand (Arak) Petrochemical
Datasheet
Categories
Chemical, Alcohol, Diol, Ethylene Glycol, Monoethylene Glycol
Features
Odorless

Physical Properties

Value Unit Test Conditions Test Method
Acetaldehyde (ppm) 10 ppm Maximum Value
Acidity (ppm) 10 ppm As Acetic Acid, Maximum Value ASTM D1613
Ash 0.005 gr/100ml Maximum Value
Color 5 APHA Pt-Co, Maximum Value ASTM D1209
Decomposition Point (DP) 199 Maximum Value, DISTILLATION at 760 MM-Hg ASTM D1078
Diethylene Glycol (DEG) Content 0.08 WT.% Maximum Value ASTM E202
Initial Boiling Point (IBP) 196 Minimum Value, DISTILLATION at 760 MM-Hg ASTM D1078
Iron (Fe) 0.01 WT.% Maximum Value ASTM E202
Purity 99.8 WT.% Minimum Value ASTM E202
Specific Gravity 1.1151 - 1.1156 20/20 °C ASTM D891
Total Chloride 0.1 ppm Maximum Value
Water content 0.08 WT.% Maximum Value ASTM E203

Thermal Properties

Value Unit Test Conditions Test Method
5-95 Vol % Range 1 Maximum Value, DISTILLATION at 760 MM-Hg ASTM D1078

Optical Properties

Value Unit Test Conditions Test Method
UV Transmittance 70 % At 220nm, Minimum Value
UV Transmittance 95 % At 275nm, Minimum Value
UV Transmittance 99 % At 350nm, Minimum Value

Disclaimer

The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

Share

Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.