Arya Sasol Petrochemical LIM1922 LDPE Datasheet

General Properties

Grade Name
Arya Sasol Petrochemical
Polymer, Thermoplastic, Polyethylene, Low Density Polyethylene
Processing Methods
Injection Molding
Caps and Closures, Toys, Households, Masterbatch Compounding
Good Processability, Pharmaceutical Grade, Food Contact, Good Flexibility

Physical Properties

Value Unit Test Conditions Test Method
Density 0.919 g/cm³ ISO 1183
MFI 22 g/10min At 2.16Kg Load, 190°C ISO 1133
MFI 75 g/10min At 5Kg Load, 190°C ISO 1133
MVR 29 cm³/10min At 2.16Kg Load, 190°C ISO 1133
MVR 98 cm³/10min At 5Kg Load, 190°C ISO 1133

Mechanical Properties

Value Unit Test Conditions Test Method
ESCR 3 h SABTEC Method
Hardness Ball Indentation 16 MPa 49N Applied Load ISO 2039-1
Hardness Shore D 45 ISO 868
Izod Impact, Notched 42 kJ/m² at +23°C ISO 180
Izod Impact, Notched 5 kJ/m² at -30°C ISO 180
Tensile Creep Modulus 80 MPa After 1 Hour ISO 899-1
Tensile Creep Modulus 45 MPa After 1000 Hours ISO 899-1
Tensile Elongation at Break 400 % ISO 527
Tensile Modulus 175 MPa ISO 527
Tensile notched impact strength 86 kJ/m² 16Mpa Maximum Tension, 8.4% Elongation at Break ISO 8256
Tensile Strength at Break 7 MPa ISO 527
Tensile Strength at Yield 8 MPa ISO 527

Thermal Properties

Value Unit Test Conditions Test Method
Enthalpy change 104 J/g DIN 53765
Heat Deflection Temperature 39 At 0.45MPa (HDT/B) ISO 75
Melting Point 105 DIN 53765
Vicat Softening Point 82 At 10N (VST/A) ISO 306


The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.


Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.