Lorestan Petrochemical Company HD-62107 UV HDPE Datasheet

62107 is a high density polyethylene grade, suitable for mass production injection moulding of articles in rapid shot sequence applications.

General Properties

Grade Name
HD-62107 UV
Lorestan Petrochemical Company
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Injection Molding
Good Environmental Stress Crack Resistance (ESCR), Food Contact, Good Toughness, Good Hardness, Good Warpage Resistance, Good UV Resistrance, Good Rigidity

Physical Properties

Value Unit Test Conditions Test Method
Density 0.962 g/cm³ at +23°C DIN 53479
MFI 7 g/10min At 2.16Kg Load, 190°C DIN 53735

Mechanical Properties

Value Unit Test Conditions Test Method
Flexural Modulus 1108 MPa ASTM D790
Izod Impact Strength, Notched 53 J/m at +23°C ASTM D256
Izod Impact, Notched 2.7 kJ/m² at +23°C DIN 53453
Tensile Elongation at Break 1048 % ASTM D882
Tensile Strength at Break 15.7 MPa ASTM D882
Tensile Strength at Yield 31.5 MPa ASTM D882

Optical Properties

Value Unit Test Conditions Test Method
Yellow Index 4 DIN 6167


The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.


Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.