فارسی
Jam PolyPropylene Company Jampilen EPX-3130UV PP Co Datasheet
″Jampilen EPX-3130UV″ is a non-filled polypropylene copolymer for injection molding with very high impact strength. The product has good U.V. resistance designed for outdoor applications. This grade is used for production of automotive parts, and compounding.
General Properties
Grade Name
Jampilen EPX-3130UV
Manufacturer
Jam PolyPropylene Company
Datasheet
Download
Categories
Polymer, Thermoplastic, Polypropylene, Polypropylene Copolymer
Processing Methods
Injection Molding
Applications
Compounding, Outdoor Applications, Engineering Parts, Automotive Parts, Automotive Bumper
Features
High Impact Strength, Good Processability, Good UV Resistrance, Heterophasic Copolymer
Physical Properties
Value
Unit
Test Conditions
Test Method
Density
0.9
g/cm³
ASTM D1505
MFI
10.5
g/10min
At 2.16Kg Load, 230°C
ASTM D1238
Mechanical Properties
Value
Unit
Test Conditions
Test Method
Flexural Modulus
900
MPa
ASTM D790
Izod Impact Strength, Notched
500
J/m
At +23°C
ASTM D256
Izod Impact Strength, Notched
100
J/m
At -20°C
ASTM D256
Tensile Elongation at Yield
6
%
ASTM D638
Tensile Strength at Yield
19
MPa
ASTM D638
Thermal Properties
Value
Unit
Test Conditions
Test Method
Heat Deflection Temperature
75
C°
At 0.45 MPa
ASTM D648
Oven Aging
360
h
At +150°C
ASTM D3012
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.