Bandar Imam Petrochemical HI0500 HDPE Datasheet

HI0500 is a natural high density polyethylene (HDPE) injection molding grade which combines high stiffness with good physical properties.

General Properties

Grade Name
HI0500
Manufacturer
Bandar Imam Petrochemical
Datasheet
Categories
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Injection Molding
Applications
Crates, Tool Boxes, Food Containers, Pallet, Engineering Parts
Features
Good Impact Strength, Good Stiffness

Physical Properties

Value Unit Test Conditions Test Method
Ash Content 0.06 WT.% Maximum Value ASTM D1063
Density 0.963 - 0.9669999 g/cm³ At +23°C ASTM D1505
MFI 4 - 6 g/10min At 2.16Kg Load, 190°C ASTM D1238
Volatiles 0.05 % Maximum Value ASTM D1960

Mechanical Properties

Value Unit Test Conditions Test Method
ESCR 4 h ASTM D1693
Tensile Elongation at Break 300 % Minimum Value ASTM D638
Tensile Strength at Break 16.7 MPa Minimum Value ASTM D638

Thermal Properties

Value Unit Test Conditions Test Method
Melting Point 130 ASTM D2117
Vicat Softening Point 124 ASTM D1525

Disclaimer

The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

Share

Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.