Lorestan Petrochemical Company HD 62N07 HDPE Datasheet

General Properties

Grade Name
HD 62N07
Lorestan Petrochemical Company
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Good UV Resistrance

Physical Properties

Value Unit Test Conditions Test Method
Density 0.96 - 0.963 g/cm³ At +23°C ASTM D1505
Flow Rate Ratio (FRR) 25.5 (2.16Kg Load, 190°C)/(21.6Kg Load, 190°C) ASTM D1238
MFI 5.6 - 8.4 g/10min At 2.16Kg Load, 190°C ASTM D1238
MFI 158.1 g/10min At 21.6Kg Load, 190°C ASTM D1238

Mechanical Properties

Value Unit Test Conditions Test Method
Flexural Modulus 1000 MPa ASTM D790
Izod Impact Strength, Notched 55 J/m ASTM D256
Tensile Elongation at Break 850 % ASTM D638
Tensile Strength at Break 12 MPa ASTM D638
Tensile Strength at Yield 30 MPa ASTM D638


The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.


Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.