فارسی
Amir Kabir Petrochemical Lupolen 2420F LDPE Datasheet
Lupolen 2420 F is a non -additivated,low density Polyethylene.It is delivered in pellet form.
General Properties
Grade Name
Lupolen 2420F
Manufacturer
Amir Kabir Petrochemical
Datasheet
Download
Categories
Polymer, Thermoplastic, Polyethylene, Low Density Polyethylene
Processing Methods
Injection Molding, Blow Molding, Blown Film
Applications
Container, Film, Bottle, Pouches, Shrink Films, Light-Duty Films
Features
Good Seal Properties, Good Optical Properties, Good Melt Strength, Good Processability
Physical Properties
Value
Unit
Test Conditions
Test Method
Density
0.923
g/cm³
ISO 1183
MFI
0.75
g/10min
At 2.16Kg Load, 190°C
ISO 1133
Mechanical Properties
Value
Unit
Test Conditions
Test Method
Film Elongation at Break, MD
300
%
ISO 527
Film Elongation at Break, TD
600
%
ISO 527
Film Tensile Strength at Break, MD
26
MPa
ISO 527
Film Tensile Strength at Break, TD
20
MPa
ISO 527
Impact Strength, Dart
150
gr
50 blown film
ASTM D1709
Tensile Modulus
260
MPa
ISO 527
Tensile Strength at Yield
11
MPa
ISO 527
Thermal Properties
Value
Unit
Test Conditions
Test Method
Vicat Softening Point
96
C°
A50 (50°C/h 10N)
ISO 306
Optical Properties
Value
Unit
Test Conditions
Test Method
Gloss
90
60 °, 50 blown film
ASTM D2457
Haze
8
%
50 blown film
ASTM D1003
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.