Marun Petrochemical Moplen MR230C PP Co Datasheet

Moplen MR230C is a polypropylene random copolymer grade, designed for hot and cold water supply systems. It is also suitable for industrial water conveyance. The material has excellent creep properties and processability by extrusion and by injection moulding.

General Properties

Grade Name
Moplen MR230C
Manufacturer
Marun Petrochemical
Datasheet
Categories
Polymer, Thermoplastic, Polypropylene, Polypropylene Copolymer
Processing Methods
Extrusion, Injection Molding
Applications
Pipes, Cold Water Pipes, Water Pipes, Hot Water Pipes
Features
Good Creep Resistance, Good Processability

Physical Properties

Value Unit Test Conditions Test Method
MFI 0.4 - 0.6 g/10min At 5Kg Load, 190°C ASTM D1238
MFI 0.3 g/10min At 2.16Kg Load, 190°C ASTM D1238
Specific Gravity 0.89 ASTM D792

Mechanical Properties

Value Unit Test Conditions Test Method
Flexural Modulus 950 MPa ASTM D790
Izod Impact Strength, Notched 160 J/m 0°C ASTM D256
Izod Impact Strength, Notched 50 J/m -23 °C ASTM D256
Tensile Elongation at Yield 430 % ASTM D638
Tensile Strength at Yield 28 MPa ASTM D638

Thermal Properties

Value Unit Test Conditions Test Method
Heat Deflection Temperature 82 0.46Mpa ASTM D648
Oven Aging 9000 h 135°C ASTM D3012
Vicat Softening Point 135 9.8N ASTM D1525

Disclaimer

The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

Share

Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.