فارسی
Jam PolyPropylene Company Jampilen RPX-345S PP Co Datasheet
″Jampilen RPX-345S″ is a polypropylene random copolymer with high fluidity and outstanding transparency and optical properties. ″Jampilen RPX-345S″ is the material of choice for applications where transparency and aesthetics are primary requirements. This grade is designed for injection molding and injection stretch blow molding (ISBM) applications. Thanks to its high fluidity, one can experience reduced cycle times and energy savings compared to conventional grades. ″Jampilen RPX-345S″ is suitable for the packaging of non-oxygen sensitive products; hence, it counts as an effective alternative for PVC and PET in ISBM.
General Properties
Grade Name
Jampilen RPX-345S
Manufacturer
Jam PolyPropylene Company
Datasheet
Download
Categories
Polymer, Thermoplastic, Polypropylene, Polypropylene Copolymer
Processing Methods
Injection Molding, Blow Molding
Applications
Food Containers, Bottle, Toys, Syringe, Caps and Closures, Test Tube, Thin-Wall Products, Sports Equipment, Households, Container, Cosmetics Packaging, Medical-Sanitary Products, Medical Tubes
Features
Food Contact, Good Processability, Good Flowability, Good Anti-Static Properties, Good Optical Properties, Fast Cycling Injection Moulding, Good Organoleptic Properties
Physical Properties
Value
Unit
Test Conditions
Test Method
Density
0.9
g/cm³
ASTM D1505
MFI
40
g/10min
At 2.16Kg Load, 230°C
ASTM D1238
Mechanical Properties
Value
Unit
Test Conditions
Test Method
Flexural Modulus
1100
MPa
ASTM D790
Izod Impact Strength, Notched
55
J/m
At +23°C
ASTM D256
Tensile Elongation at Yield
9
%
ASTM D638
Tensile Strength at Yield
28
MPa
ASTM D638
Thermal Properties
Value
Unit
Test Conditions
Test Method
Heat Deflection Temperature
82
C°
At 0.46 MPa
ASTM D648
Oven Aging
360
h
At Air, 150°C
ASTM D3012
Vicat Softening Point
128
C°
10N
ASTM D1525
Optical Properties
Value
Unit
Test Conditions
Test Method
Gloss
90
ASTM D2457
Haze
11
%
1mm
ASTM D1003
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.