Ilam Petrochemical 7700M HDPE Datasheet

7700M is an extrusion grade manufactured by the suspension polymerization of ethylene monomer.

General Properties

Grade Name
Ilam Petrochemical
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Pipes, Gas Pipes, Water Pipes, Pressure Pipes, Sewer Pipes, Pipe Fittings
Good Environmental Stress Crack Resistance (ESCR), Good Mechanical Strength

Physical Properties

Value Unit Test Conditions Test Method
Density 0.95 g/cm³ ISO 1183
MFI 0.28 g/10min 5 kg ISO 1133
MFI 9.5 g/10min 21.6 kg ISO 1133

Mechanical Properties

Value Unit Test Conditions Test Method
ESCR 1000 h > 1000 ASTM D1693
Izod Impact, Notched 35 kJ/m² At 23 °C ASTM D256
Tensile Elongation at Break 500 % > 500 ASTM D638
Tensile Strength at Break 37.2653 MPa ASTM D638


The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.


Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.