Ilam Petrochemical 8200B HDPE Datasheet

8200B is a blow molding grade that manufactured by the suspension polymerization of ethylene monomer.

General Properties

Grade Name
Ilam Petrochemical
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Blow Molding
Container, Fuel Tank
Good Rigidity, Good Environmental Stress Crack Resistance (ESCR), Good Impact Strength

Physical Properties

Value Unit Test Conditions Test Method
Density 0.952 g/cm³ ISO 1183
MFI 0.027 g/10min 2.16kg ISO 1133
MFI 0.19 g/10min 5kg ISO 1133

Mechanical Properties

Value Unit Test Conditions Test Method
ESCR 600 h >600 , 80°C ASTM D1693
Tensile Elongation at Break 500 % >500 ASTM D638
Tensile Strength at Break 42 MPa ASTM D638


The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.


Contact Form

Request a new material, suggest an improvement or report a bug in datasheet.