فارسی
Bandar Imam Petrochemical HI0500UA HDPE Datasheet
HI0500 is a natural high density polyethylene (HDPE) injection molding grade which combines high stiffness with good physical properties.
General Properties
Grade Name
HI0500UA
Manufacturer
Bandar Imam Petrochemical
Datasheet
Download
Categories
Polymer, Thermoplastic, Polyethylene, High Density Polyethylene
Processing Methods
Injection Molding
Applications
Pallet, Tool Boxes, Food Containers, Crates, Engineering Parts
Features
Good Impact Strength, Good Stiffness
Physical Properties
Value
Unit
Test Conditions
Test Method
Ash Content
0.06
WT.%
Maximum Value
ASTM D1063
Density
0.963 - 0.9669999
g/cm³
At +23°C
ASTM D1505
MFI
4 - 6
g/10min
At 2.16Kg Load, 190°C
ASTM D1238
Volatiles
0.05
%
Maximum Value
ASTM D1960
Mechanical Properties
Value
Unit
Test Conditions
Test Method
ESCR
4
h
ASTM D1693
Tensile Elongation at Break
300
%
Minimum Value
ASTM D638
Tensile Strength at Break
16.7
MPa
Minimum Value
ASTM D638
Thermal Properties
Value
Unit
Test Conditions
Test Method
Melting Point
130
C°
ASTM D2117
Vicat Softening Point
124
C°
ASTM D1525
Disclaimer
The information presented on this datasheet was acquired by Tecves from the producer of the material. Tecves makes substantial efforts to assure the accuracy of this data. However, Tecves assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
Share
Share on Facebook
Share on Twitter
Share on Linkedin
Share on Telegram
Contact Form
Request a new material, suggest an improvement or report a bug in datasheet.